The requirement of wireless for industries varies greatly from the systems that are used in offices. Building an Industrial Wireless infrastructure is a very difficult task, because it requires building a successful and fast network connection between various departments while maintaining cost efficiency. It does not matter what is being manufactured, but the area where the system is installed is quite large, sometimes even extending to miles. When building an Industrial Wireless Bridge, factors like functionality and reliability needs to be addressed properly.
Organizations frequently require data and voice communication for smooth flow of ideas and operations. Though wired networks can support high data rate with great reliability, it is expensive and not feasible to dig grounds or lay wires in industries where it can be hazardous to wires installations. So, what are the features that should be looked upon while installing Industrial Wireless products?
10 year anniversary | Infrastructure | data encryption | ethernet | industrial environment | industrial wireless | infrastructure monitoring | monitoring | security | wireless | wireless network | wireless networking
Organizations frequently require data and voice communication for smooth flow of ideas and operations. Though wired networks can support high data rate with great reliability, it is expensive and not feasible to dig grounds or lay wires in industries where it can be hazardous to wires installations. So, what are the features that should be looked upon while installing Industrial Wireless products
In infrastructure development, a bridge is constructed to connect two locations that are separated due to a certain distance. They are used to connect places that have been separated by a water body or a valley in between. Industries also use Wireless Bridges for similar purpose but in a completely different way. An Industrial Wireless Bridge is used to connect two networks that are separated by a certain distance. They are widely used in large campuses where various different locations require simultaneous access to one parent network, which is commonly known as the intranet network.
The device that allows users of two or more comprehensive set of connections to exchange information with one another over distance without wires is referred as a wireless bridge. The networks can be placed in the adjacent buildings or in the same building with the help of proper antennas and be competent to connect set-up up to a distance of up to 30 miles. The various products that are available for outdoor application with the use of technology include Industrial Wireless Access Bridge, Long Range Wireless Access Bridge, and Outdoor Wireless Ethernet Bridge. These Ethernet bridges are ideal for use in industrial environments as they support high-speed networking.
Industrial Wireless Controls have added a new dimension to the technological advancements for machinery related operations. In order to enhance the operational efficiency, we keep on digging for new ways to exploit the resources with maximum cost-effectiveness. What the Industrial Wireless Controls do is exactly that. The wireless devices communicate with the machinery in terms of giving the commands, monitoring the machine operations and integrate the working of two or more systems to achieve better productivity.
Many of us are familiar with wireless technology in our laptop computers, cellular phones and GPS navigation devices. All of these consumer devices work ok for our daily needs but inconsistent wireless connectivity can become a real issue in industrial application that need to be considerably more reliable. So, how do you make a wireless Ethernet connection more reliable? This is the question that this blog will try to explain. AvaLAN Wireless has produced over 50,000 robust and reliable wireless Ethernet devices over the past few years and we have evolved our product to address the specific issue of reliable wireless connectivity. 1) Add sub-packet error correction to improve Ethernet packet reliability and reduce full packet resends. Ethernet packets are actually very large in the world of data networking. AvaLAN has learned that if you divide an Ethernet packet into smaller packets and perform error check in the smaller pieces you have less "resends" and you can have higher reliability of full packets. Traditional Ethernet only allows a minimal number of lost packets before a connection is lost or your data rate is significantly impacted by multiple packet retries/resends.
When designing any system, engineers and system architects usually want to know how well the various components of the system will perform. In a microprocessor, logic or other digital system these questions usually are answered in terms of clock speeds, instructions per second or data throughput. With wireless communication, the most common performance questions involve range.
This article will discuss design considerations that provide the maximum transmission distance for digital wireless radio communication in the FCC unlicensed bands, while minimizing the system power supply requirements, thus facilitating solar or wind powered remote applications.
Different Components Of A Wireless Security System Do you feel safe in your office? Do you have the feeling that your office lacks privacy? Are you perturbed because of the rising cases of thefts in your area? Is there a way to keep a check on these dubious activities? Well Yes! You can ensure the safety of your employees with a Wireless Security system. With the increasing crime rate, it is very necessary to install a wireless security system. Central Computer, Sensors, Motion Detectors, IP Cameras and Intercoms are different components in a wireless security system which performs varied functions.