A wireless bridge is an important piece of technology for creating major wireless network over a long distance. It takes an existing signal from a wireless router or wireless access point and rebroadcasts it to create a second network. Some wireless Ethernet are also equipped to connect through the new repeated network and therefore, increase the distance span coverage of the network.
Many of us are familiar with wireless technology in our laptop computers, cellular phones and GPS navigation devices. All of these consumer devices work ok for our daily needs but inconsistent wireless connectivity can become a real issue in industrial application that need to be considerably more reliable. So, how do you make a wireless Ethernet connection more reliable? This is the question that this blog will try to explain. AvaLAN Wireless has produced over 50,000 robust and reliable wireless Ethernet devices over the past few years and we have evolved our product to address the specific issue of reliable wireless connectivity. 1) Add sub-packet error correction to improve Ethernet packet reliability and reduce full packet resends. Ethernet packets are actually very large in the world of data networking. AvaLAN has learned that if you divide an Ethernet packet into smaller packets and perform error check in the smaller pieces you have less "resends" and you can have higher reliability of full packets. Traditional Ethernet only allows a minimal number of lost packets before a connection is lost or your data rate is significantly impacted by multiple packet retries/resends.
Nowadays, any big or small business that you see around is undoubtedly making use of wireless connections. A secure wireless network is a must for the sake of data security & for the businesses to function smoothly. Nowadays, Wireless Networks are prone to hacking & it is very essential that proper steps are taken in order to avoid such a situation.
How to quote a wireless surveillance system Having the answers to the following questions can help you adequately scope a wireless surveillance system and properly quote the system.
3 Key Steps to a successful Wireless IP camera installations:
From time to time I find myself forgetting that many technical folks speak a different language because of all the lingo that we use with in our respective industries. Today, I would like to explain what an outdoor wireless bridge is and why you might need one. An outdoor wireless bridge is typically a pair of devices used to connect a network or pc or other network device to a network. Ethernet networks are all around us both at work and at home. The outdoor wireless enviroment requires a manufacturer to modify their design in order to deal with more a more extreme tempurature range, UV exposure and humidity. An outdoor wireless bridges are used in a number of applications including: wireless digital signage, wireless surveillance, wireles access control and industrial control. All of these applications have an outdoor device that needs to be connected to a network. There are many differnet wireless technologies that can be used in outdoor wireless bridges. Outdoor wireless bridges can be standard or proprietary. Proprietary wireless bridges have advantages of standard bridges because they can be more secure and customized to the needs of the outdoor wireless bridge enviroment. One of the best ways to secure and outdoor wireless bridge is to only have a limited number of wireless devices that can access the bridged device. If you use a proprietary wireless bridge then more common devices like laptops and cell phone cannot access the device. Pay attention to the needs of your outdoor wireless bridge enviroment when selecting a wireless bridge and remember you select diffent clothes to wear if your going outside so why would you not insure your device is also built for the outdoor envirment.